System Settings; Setting The Onscreen Display Language - Pioneer PDP-5004 Manual De Instrucciones

System Settings

Setting the Onscreen Display
Language
The onscreen display language has been set to English as
the factory default. To change to another language, the
screen setting must be changed. Follow the procedures
below to change the setting.
All illustrations of the remote control unit explaining
settings and operation are for PDP-5004/PDP-4304.
Remote control unit
1
Set the rear panel MAIN POWER switch to ON.
The STANDBY indicator on the front panel will light
red.
2
Press the STANDBY/ON button to turn the power
ON.
The ON indicator on the front panel will light green.
3
Press the MENU button to display the menu
screen.
STANDARD
PICTURE SCREEN
CONTRAST
BRIGHTNESS
COLOR
TINT
SHARPNESS
MPEG NR
DNR
CTI
COLOR TEMP.
PICTURE RESET
ENTER
SET
20
EN
STANDBY/
ON
MENU
2/3
SET
5/∞
INPUT1
SETUP OPTION
:
0
:
0
:
0
:
0
:
0
:
ON
:
MID
:
ON
:
MID
EXIT
MENU
4 Use the 2/3 buttons to select [OPTION].
STANDARD
PICTURE SCREEN
LANGUAGE
ENERGY SAVE
POWER MANAGEMENT
AUTO POWER OFF
ORBITER
MASK CONTROL
ENTER
SET
5
Use the 5/∞ buttons to select [LANGUAGE], then
press the SET button.
LANGUAGE
SET
SET
6 Use the 2/3 buttons to select the desired
language.
Each time the 2/3 buttons are pressed, the language
alternates between those available, in the following
order:
3 ENGLISH 2 3 FRANÇAIS 2
LANGUAGE
SET
SET
7
With the desired language displayed, press the
SET button.
The selected language will be set in memory, and the
screen will return to that shown in step 4.
8
After completing settings, press the MENU button
to return to the normal display.
Note
When the onscreen display language is set to any of INPUT 1 to
INPUT 5, the same display language will be set, regardless of the
type of input.
INPUT1
SETUP OPTION
:
ENGLISH
:
STANDARD
:
OFF
:
DISABLE
:
OFF
:
ON
EXIT
MENU
:
ENGLISH
EXIT
MENU
3 ESPAÑOL 2
:
ENGLISH
EXIT
MENU