Remote Control Unit - Pioneer PDP-5004 Manual De Instrucciones

Part Names and Functions

Remote Control Unit

[PDP-5004, PDP-4304]
1
2
3
4
5
6
7
8
9
When handling the remote control unit
¶ Do not drop the remote control unit or expose it to
moisture.
¶ Do not use the remote control unit in a location subject to
direct sunlight, heat radiation from a heater, or in a place
subject to excessive humidity.
¶ When the remote control unit's batteries begin to wear out,
the operable distance will gradually become shorter. When
this occurs, replace all batteries with new ones as soon as
possible.
6
EN
0
-
=
~
!
@
AXD1496
1
SCREEN SIZE button
Press to select the screen size (pages 27 to 28).
2
INPUT buttons
Press to select the input (page 25).
3
MENU button
Press to open and close the on-screen menu
(pages 20 to 41).
4
ADJUST (5/∞/3/2) buttons
Use to navigate menu screens and to adjust various
settings on the unit (pages 20 to 41).
5
SET button
Press to adjust or enter various settings on the unit
(pages 20 to 41).
6
AV SELECTION button
Press to switch to Picture settings.
(VIDEO mode: DYNAMIC, STANDARD, MOVIE,
GAME, USER
PC mode: STANDARD, USER)
7
SUB INPUT button
During multi-screen display, use this button to change
inputs to subscreens (page 28).
8
SPLIT button
Press to switch to multi-screen display (page 28).
9
MUTING button
Press to mute the volume (page 26).
0
AUTO SET UP button
When using computer signal input, automatically sets
the [POSITION], [CLOCK] and [PHASE] to optimum
values (page 33).
-
STANDBY/ON button
Press to put the unit in operation or standby mode
(page 25).
=
DISPLAY button
Press to view the unit's current input and setup mode
(page 26).
~
SWAP button
During multi-screen display, use this button to switch
between main screen and subscreen (page 28).
!
PIP SHIFT button
When using PinP mode with multi-screen display, use
this button to move the position of subscreen (page
28).
@
VOLUME (+/–) buttons
Use to adjust the volume (pages 25 and 26).