Running The Cleaning Programme - melitta Purista Serie Manual De Instrucciones

7.3 Running the cleaning
programme
This cleaning programme is used to
remove residues and coffee oil residues
with the aid of fully automatic coffee
maker cleaning agents.
To avoid damage to the appliance, we
recommend running the cleaning pro-
gramme every 2 months or as requested
by the appliance.
The Clean display light requests
you to clean the unit.
CAUTION
Contact with fully automatic coffee
maker cleaning agent may lead to eye
and skin irritation.
Observe the processing instructions on
ƒ
the packaging of the fully automatic
coffee maker cleaning agent.
ATTENTION
The use of unsuitable fully automatic
coffee maker cleaning agent can damage
the appliance.
Only use Melitta® PERFECT CLEAN
ƒ
cleaning tablets for fully automatic
coffee machines.
The cleaning programme takes approx.
15 minutes and should not be interrupted.
The cleaning programme runs in several
stages. Progress is indicated by the num-
ber of coffee beans displayed.
The appliance performs several rinsing
operations during the cleaning pro-
gramme. The drip tray is also rinsed.
Care and maintenance
Requirement: The appliance is ready for
operation.
Press the "Service" button for
1.
more than 2 seconds to call up Service
mode 1.
Press the "Service" button
2.
repeatedly until the display for the
cleaning programme appears.
Press the "Service" button for
3.
more than 2 seconds to start the
cleaning programme.
» The Clean display flashes
until the cleaning programme is
finished.
The first stage of the cleaning pro-
gramme starts. One coffee bean lights up.
» The Drip tray display lights up
and requests you to empty the drip
tray and the coffee grounds
container.
4. Empty the drip tray and the coffee
grounds container.
5. Insert the drip tray without the coffee
grounds container.
6. Place the coffee grounds container
beneath the outlet.
» The appliance rinses twice.
» The Clean display flashes
rapidly and requests you to remove
the brewing unit and insert a
cleaning tablet.
7. Remove the brewing unit. Do not
switch off the appliance.
8. Rinse the brewing unit under running
water (see section 7.2 Cleaning the
brewing unit on page 44).
9. Place a cleaning tablet in the brewing
unit. Insert the brewing unit into the
appliance.
45