Kobalt SGY-AIR70NB Manual Del Usuario página 16

CARE ANDMAINTENANCE
3. Fill the canister (J) about 1/4 full of cleaning
solution screw the canister back on and spray the
entire contents out into a secondary container.
4. Remove the canister (J) from the Spray
Gun by turning counterclockwise and place it in the
secondary container to soak 3-5 minutes.
NOTE: You will need to add additional cleaning
solution to the container.
5. Unscrew the Air Cap (C) by hand turning
counterclockwise and place it in the
secondary container to soak and remove
air distribution ring (L).
6. Unscrew the Fluid Adjustment Knob (E) by
turning counterclockwise, using a damp cloth
with cleaning solution on it wipe off the fluid
adjustment knob and set it aside.
7. Pull out needle spring and the paint needle.
Place it in the secondary container to soak.
3
4
5
6
7
16
A
Load Cleaner
A
Counterclockwise
C
L
Counterclockwise
Counterclockwise
J
J
E