Troubleshooting - Kobalt SGY-AIR70NB Manual Del Usuario

CARE AND MAINTENANCE
6. Screw on the Fluid Adjustment Knob (E) clockwise.
Storage
1. When not using the spray gun, turn the fluid adjustment knob counterclockwise (to open)
which will reduce the spring tension on the needle fluid tip.
2. Store the gun in a secure area and out of the reach of children. When storing for longer than
1 week, add a couple drops of lubricant into the air inlet.

TROUBLESHOOTING

If you have any questions regarding sprayer performance, please call our Customer Service
Department at 1-888-3KOBALT, 8:00 a.m. – 8:00 p.m., EST, Monday–Friday.
SPRAY PATTERN/PROBLEM POSSIBLE
Improper spray pattern
Improper spray pattern
REASON
1)One side of air cap
is clogged.
2)Dirt on one side of
fluid nozzle.
1)Loose air cap/dirty seal.
2)One side of air cap
is clogged.
3)Dried material on one
side of fluid nozzle.
7
SOLUTION
Remove air cap and soak in solvent, then
blow air through until clean. Wipe off
nozzle tip using a rag moistened with
thinner. To clean holes, use a broom straw
or toothpick. Never try to detach dried
material with a sharp tool.
1)Tighten air cap.
2)Remove air cap and soak in solvent, then
blow air through until clean. Wipe off fluid
nozzle using a rag moistened with
thinner. To clean holes, use a broom
straw or toothpick. Never try to detach
dried material with a sharp tool.
19
Clockwise
E