Care And Maintenance - Kobalt SGY-AIR70NB Manual Del Usuario

CARE AND MAINTENANCE

To properly maintain and keep your sprayer working at its optimal performance, it is strongly
recommended that the spray gun nozzle be cleaned and cleared of any clogs or debris using
recommended cleaning solutions such as Mineral Spirits, Paint Thinner or Lacquer Thinner.
Consult with your local retailer in choosing the right clean solution for the material you are using.
DO NOT USE ACID BASED SOLVENTS, AS ACID BASED SOLVENTS CAN DAMAGE THE
SPRAYER.
ALWAYS REMOVE THE AIR SUPPY FROM THE SPRAY GUN PRIOR TO PERFORMING
ANY CLEANING OR MAINTAINENACE.
KEEP AWAY FROM ANY IGNITION SOURCES.
ALWAYS WEAR PROPER PPE WHILE CLEANING OR PERFORMING MAINTENACE ON
THE SPRAY GUN.
WARNING
NEVER SUBMERGE THE SPRAY GUN HOUSING INTO SOLVENT MATERIAL.
Cleaning Instructions
1. Remove the air supply from the spray gun.
2. Unscrew the Canister (J) from Spray Gun (A)
and empty any remaining paint back into
the original container.
1
2
A
15
J
Clockwise