Operation; Authorization; Charging The Vehicle - Mennekes AMTRON Serie Manual De Instrucciones

7 Operation

7.1

Authorization

Depending on the configuration, using the device
may require prior authorisation The following
possibilities exist:
„ No authorisation is required. All users can charge.
„ Authorisation through RFID.
„ All users with an RFID card can charge.
„ All users whose RFID card is activated can charge.
„ Authorisation through Backend-System.
„ Authorisation is dependent on a Backend-System,
for example with an RFID card, a smartphone app
or ad hoc (e.g. direct payment).
„ For version Professional+ 7,4 / 22 PnC only:
Authorisation by communication between device
and vehicle according to ISO 15118.
Requirement: support your vehicle and backend
system (ISO 15118).
9
The "Standby" symbol lights up on the LED information
panel.
f Authorising depending on the configuration:
f Authorisation through RFID: Hold the RFID card in
front of the RFID card reader.
f Authorisation through Backend-System: Follow the
instructions for the respective Backend-System.
f Authorisation according to ISO 15118: Connect the
charging cable to the vehicle and, if necessary, to
the device.
f Comply with the instructions on the device (e.g. scan
QR code).
9
The data are checked. The "Wait time" symbol lights up
on the LED information panel.
9
The authorisation was successful. The charging pro-
cess can now be started.
If charging does not start within the release time,
the authorisation is reset, the charging sockets
are locked and the device switches to "Standby"
mode. A new authorisation is required.
If the authorisation process is not completed, the following
problems may exist:
Problem
Unknown custo- f Create customer in backend
mer number. system.
Your account has f Check settings in the backend
not been activa- system.
ted. f Make sure that the customer is
activated in the backend sys-
tem.
f Repeat the authorisation pro-
No communica-
tion between the cess.
device and the
Backend-System.
7.2

Charging the vehicle

T
WARNING
Risk of injury from using unsuitable aids
Use of adaptor plugs, extensions, or additional charging
cables in connection with the device can result in electric
shock or cable fire.
f Use only the charging cable intended for the vehicle
and the device.
f Do not use adaptor plugs, extensions, or additional
charging cables to charge the vehicle.
Fig. 18: Charging the vehicle (example)
9
The authorisation process is complete.
f Ensure that the vehicle and the charging cable are sui-
table for Mode 3 charging.
f Unroll the charging cable completely.
Solution
EN
33