10 Taking out of service and
dismantling
The tasks described in this section may only be
carried out by a qualified electrician.
Taking the device out of service
f Open the device.
Î "5.4 Opening the device"
f Disconnect the supply line.
f If necessary, disconnect the line of the shunt release.
Dismantling the device
f Take the device out of service.
f Remove plugs and screws.
f Detach the device from the wall.
f Route lines out of the enclosure.
f Close the device.
Î "6.7 Closing the device"
11 Storage
Proper storage can positively affect and maintain the ope-
rability of the device.
f Clean the device before storing.
f Store the device in a clean and dry place in its original
or other suitable packaging.
f Observe permissible storage conditions.
Permissible storage conditions
Storage temperature
Average temperature over
24 hours
Relative humidity
39
-25°C... + 40°C
< 35 °C
max. 95 %
(non-condensing)
12 Disposal
Discard the device and packaging accor-
ding to regulations at the end of its service
life. Observe the national regulations for dis-
posal and environmental protection appli-
cable in the country of use. Old devices
and batteries must not be disposed of with
household waste.
f Dispose of packaging material in designated collection
containers.
f Dispose of old devices and batteries via your dealer.
13 Accessories
Accessories, such as protective roofs or charging cables,
are available on our website under "Accessories".
https://www.chargeupyourday.com/