JVC UX-T55 Instrucciones página 31

Ocultar thumbs Ver también para UX-T55:
Tabla de contenido

Publicidad

All manuals and user guides at all-guides.com
Timer recording of broadcast
● The current time must be set before the timer
can be used.
● Make sure that the safety tabs of the cassette
have not been broken off.
Operations
STANDBY
1
5
AUX
2
1
Set the
button to ON.
2
Load a cassette.
● Insert the cassette with the side to be
recorded facing out.
● Select the required reverse mode. (
)
3
Set the timer. (Refer to "Setting the timer" on
page 29.)
● Set the timer about a minute before the
broadcast to be recorded is scheduled to
start.
4
Tune to the station to be recorded. (Refer to
page 23.)
5
Set the
button to STANDBY.
● Timer recording will start at timer start time
and the power will be switched off at timer
stop time. (The timer mode is then released.)
● To cancel timer operation
Press the TIMER/SNOOZE button for more
than 2 seconds so that the timer mode
indicator (
) goes out.
If you do this, timer recording will not start at the
timer start time.
Notes:
Once the timer has been set, the start and stop
times, etc., are stored in memory. When timer
recording or playback is required at different
times, the timer must be set again.
● After setting the timer start and stop times,
check that the tuner is tuned to the required
Grabación por temporizador de una
radiodifusión
● Antes de utilizar el temporizador es necesario
ajustar la hora actual.
● Asegúrese de que las lengüetas de
seguridad del cassette no estén rotas.
Operaciones
VOLUME
MICRO COMPONENT SYSTEM UX-T55
A U T O
T A P E
S E L E C T O R
AUTO REVERSE
1
Coloque el botón
2
Coloque un cassette.
● Inserte el cassette con el lado a ser
grabado apuntando hacia afuera.
● Seleccione el modo de inversión deseado.
or
(
o
3
Ajuste el temporizador. (Refiérase a "Ajuste
del temporizador" en la página 29.)
● Ajuste el temporizador a un minuto
aproximadamente antes del comienzo
programado de la radiodifusión a ser
grabada.
4
Sintonice la estación a ser grabada.
(Refiérase a la página 23.)
5
Coloque el botón
● La grabación por temporizador se iniciará
en a la hora de activación del temporizador
y la unidad desconecta la alimentación a
la hora de parada del temporizador. (Luego
se desactiva el modo de temporizador.)
● Cancelación de la operación por
temporizador
Presione el botón TIMER/SNOOZE durante
más de 2 sequndos para borrar el o indicador
de modo de temporizador (
Si usted hace esto, la grabación por
temporizador no se iniciará a la hora de
activación del temporizador.
Notas:
Una vez ajustado el temporizador, la hora de
activación y desactivación, etc., son registradas
en memoria. Cuando se desea efectuar una
grabación o reproducción por temporizador a
horas diferentes, es necesario ajustar otra vez
el temporizador.
COMPACT
DIGITAL AUDIO
ACTIVE HYPER
TIMER/SNOOZE
BASS PRO
CLOCK
ONE TOUCH
REC
TAPE
4
en ON.
)
en STANDBY.
).
Registrazione di trasmissioni
● Prima di poter utilizzare il timer de
impostata l'ora esatta.
● Accertarsi che le linguette di prote
registrazione della cassetta non s
rimosse.
Operazioni
OPEN
3
31
BAND
CD
TUNER
1
Portare l'interruttore
2
Inserire una cassetta.
● Inserire la cassetta col lato da
rivolto all'esterno.
● Selezionare il modo reverse d
(
o
)
3
Impostare il timer. (Vedi "Impost
timer" a pag. 29.)
● Impostare il timer su circa un mi
dell'inizio della trasmissione che
registrare.
4
Sintonizzare la stazione che s
registrare. (Vedi in proposito pag.
5
Portare l'interruttore
● La registrazione col timer inizia
di avvio e l'alimentazione viene d
all'orario di arresto. (Il modo del t
quindi abbandonato).
● Per cancellare il funzionamento
Premere il tasto TIMER/SNOOZE
2 secondi in modo da far spegnere
del modo del timer (
).
Se questa operazione viene es
registrazione col timer non si avvier
di avvio del timer.
Note:
Una volta che il timer è stato imposta
di avvio e di arresto, ecc., vengono m
Quando si desidera eseguire la regis
la riproduzione ad un orario diverso, il
essere reimpostato.
● Dopo aver impostato gli orari di
su ON.
su STAN

Publicidad

Tabla de contenido
loading

Tabla de contenido