Tool Settings; Dust Extraction; Edge Protector - Festool RO 125 FEQ Manual De Instrucciones

All manuals and user guides at all-guides.com
cool down for approx. 3-5 minutes before
using it again. The tool requires less time
to cool down if it is running, i.e. in neutral
position.

Tool settings

Always remove the power plug
from the socket before carrying out any
work on the power tool.

Dust extraction

Always connect the tool to a dust ex-
tractor.
You can connect a Festool extractor with an
extractor hose diameter of 27 mm to the
dust extraction port (4.1).

Edge protector

The edge protector (5.1) prevents the sand-
ing pad from touching the edge perpendicu-
lar to a surface (e.g. when sanding along a
wall), thereby preventing the machine from
rebounding.
Assembly: Slide the edge protector onto the
machine until it latches into place.
7