Abicor Binzel iCAT WH Instructivo De Servicio página 46

11 Dismounting
11 Dismounting
DANGER
Risk of injury due to unexpected start
The following instructions must be adhered to throughout all maintenance, servicing,
assembly, disassembly and repair work:
• Switch off the power source.
• Close off the coolant supply.
• Close off the compressed air supply.
• Disconnect all electrical connections.
• Switch off the entire welding system.
NOTICE
• Observe the information given in section
 8 Putting out of operation on page EN-20.
1 Dismounting the cable assembly
 6.4 Replacing the cable assembly on page EN-16
2 Dismount the iCAT WH from the robot.
 6.3 Fastening the iCAT WH and cable assembly to the robot on page EN-14
EN - 24
iCAT WH