STAMOS S-LS-96 Manual De Instrucciones página 46

1. Installation of the PSU operating software
To be able to edit and read the parameters of the PSU after its
connection to a computer, one needs to install a dedicated
"Monitoring assistant" program for each model.
To install the program, double-click the icon assigned to it and follow
the instructions displayed on the screen.
If instead of starting the installation process the screen displays the
message as below:
This indicates that the MSComm32.ocx file necessary for the
application to function properly is missing or corrupted.
Perform the following steps:
- determine how many bits of Windows are installed on the computer
32 or 64.
- copy the MSComm32.ocx file and paste it into the C:Windows32
folder for a 32-bit system and into the C:\Windows\sysWOW64 folder
for a 64-bit system
- open the command line "cmd"
- at the command prompt, type depending on your system type:
regsvr32 C:\Windows\system32\MSComm32.ocx
or: regsvr32 C:\Windows\sysWOW64\MSComm32.ocx
2. Software interface description