Roland SP-808 Manual Del Usuario página 172

Apéndices
FAST FORWARD (MCS)
Status Data Bytes
F0H 7FH, Dev, 06H, 03H
Byte Description
F0H Status of System Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (10H or 7FH)
06H MMC Command Message
03H DEFERRED PLAY (MCS)
F7H EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the SP-808
goes into the fast forward condition.
REWIND (MCS)
Status Data Bytes
F0H 7FH, Dev, 06H, 05H
Byte Description
F0H Status of System Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (10H or 7FH)
06H MMC Command Message
05H REWIND (MCS)
F7H EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the SP-808
goes into the rewind condition.
RECORD STROBE
Status Data Bytes
F0H 7FH, Dev, 06H, 06H
Byte Description
F0H Status of System Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (10H or 7FH)
06H MMC Command Message
06H RECORD STROBE
F7H EOX (End of System Exclusive Message)
If the transport switch [REC] was pressed out of the recording condition, the SP-808
transmits as the device ID 7FH.
RECORD EXIT
Status Data Bytes
F0H 7FH, Dev, 06H, 07H
Byte Description
F0H Status of System Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (10H or 7FH)
06H MMC Command Message
07H RECORD EXIT
F7H EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the SP-808
exits from the record condition.
MMC RESET
Status Data Bytes
F0H 7FH, Dev, 06H, 0DH
Byte Description
F0H Status of System Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (10H or 7FH)
06H MMC Command Message
0DH MMC RESET
F7H EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the SP-808
resets all communication channels related with MMC.
WRITE
Status Data Bytes
F0H 7FH, Dev, 06H, 40H, ccH, ddH, eeH, ..., ffH, ...
172
Status
F7H
Status
F7H
Status
F7H
Status
F7H
Status
F7H
Status
F7H
Byte Description
F0H Status of System Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (10H or 7FH)
06H MMC Command Message
40H WRITE
ccH Information Bytes follows the command
ddH The name of the writable Information Field
eeH Information Field Format
| |
ffH Field names and data
| |
F7H EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the SP-808
writes the data to the specified information field.
MASKED WRITE
Status Data Bytes
F0H 7FH, Dev, 06H, 41H, 04H, ddH, eeH, ffH, ggH
Byte Description
F0H Status of System Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (10H or 7FH)
06H MMC Command Message
41H MASKED WRITE
04H Number of Bytes follows the command
ddH The name of the masked type writable Information Field
eeH Byte number to write in the Bit Map
ffH Bit location of the bit map byte to change
ggH New data to write to the specified bit map byte
F7H EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the SP-808
writes the data to the specified bit map byte.
LOCATE (MCP)
Format 1—LOCATE [I/F]
Status Data Bytes
F0H 7FH, Dev, 06H, 44H, 02H, 00H, nnH
Byte Description
F0H Status of System Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (10H or 7FH)
06H MMC Command Message
44H LOCATE (MCP)
02H Number of Bytes
00H "I/F" sub command
nnH Information Field (08H, 09H, 0AH, 0BH, 0CH, 0DH, 0EH, 0FH)
F7H EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the SP-808
locates the selected time location stored to the specified information field.
Format 2—LOCATE [TARGET]
Status Data Bytes
F0H 7FH, Dev, 06H, 44H, 06H, 01H, hrH, mnH, scH, frH, ffH
Byte Description
F0H Status of System Exclusive Message
7FH Universal System Exclusive Message Realtime Header
Dev Device ID (10H or 7FH)
06H MMC Command Message
44H LOCATE (MCP)
06H Number of Bytes
01H "TARGET" sub command
hrH, mnH, scH, frH, ffH
Standard Time with Sub Frame
F7H EOX (End of System Exclusive Message)
If the device ID on the message was as same as that of the receiving 10H or 7FH, the SP-808
locates the specified time location received from the command.
MOVE
Status Data Bytes
F0H 7FH, Dev, 06H, 4CH, 02H, ddH, ssH
Status
F7H
Status
F7H
Status
F7H
Status
F7H