arjo Flowtron ACS900 Instrucciones De Uso página 18

Ocultar thumbs Ver también para Flowtron ACS900:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Garment Type and
Inflation Indication
(or Calf & Thigh)
Sequential (Tri Pulse) Calf
(or Calf & Thigh)
Tubeset Connector
Number
Start/Stop Therapy
Garment Pressure
Indication
These show which garment type is connected to each
tubeset and when each garment is being inflated..
NOTE
A garment connected but not inflated is shown as an
outline on the leg icon. When it is inflated, the garment
outline is filled in black
Garment
Foot
Uniform Calf
The garment connector on the end of each tubeset has
a push button which is colour-coded and has a number
marked on it: blue "1" or orange "2". The numbers
correspond with the "1" and "2" on the left side of the
LCD screen adjacent to the leg icons.
The icon above the Middle Control button changes
between Run and Standby modes, as follows.
Start Therapy icon. In normal operation, this
icon is displayed when the pump is in
Standby and at least one garment is
connected. Press the button to start therapy.
Stop Therapy icon. In normal operation, this
icon is displayed when the pump is in Run
mode. Press the button to stop therapy.
The default target inflation pressure for each garment
is as follows:
• Foot: 130 mmHg.
• Uniform calf and calf & thigh: 40 mmHg.
• Sequential calf and calf & thigh: 45 mmHg.
10
Connected and
Not Inflated
Connected and
Inflated

Publicidad

Tabla de contenido
loading

Tabla de contenido