Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
To Change the Audible
Alarm Volume Setting
Resetting the Therapy
1. When the pump is in Standby, press the Left
Control button for 2 seconds to enter Audible
Alarm Volume Setting mode.
2. The Audible Alarm Volume and Audible Alarm
Status icons will be displayed in the bottom left of
the screen.
3. Each time the Middle Control button is pressed the
volume setting increases; if the volume setting is
at maximum, pressing the button again will cycle
back to the minimum setting.
4. The pump will save the selected volume setting
when the Left Control button is pressed.
NOTE
If the left control button is not pressed within two
minutes, the selected setting will NOT be stored,
the volume and audible icons will be removed and the
pump will exit the audible alarm volume setting
mode.
Minimum
Volume
1. When the pump is in Standby, press and hold the
Right Control button for 2 seconds. The Therapy
Time
Time value will flash for 2 minutes. Press and hold
the Middle Control button for 3 seconds to reset
the Therapy Time to zero.
NOTE
This is the pump run time since the Therapy Time was
last reset.
Press the Right Control button again to save the new
setting. If this button is not pressed within two minutes,
the timer will NOT be reset and will go back to show
the original data.
Audible Alarm
Volume
Medium
Volume
20
Audible Alarm
Status
Maximum
Volume
Publicidad
Tabla de contenido
