Adjusting The Garment Removed From The Limb Alarm - arjo Flowtron ACS900 Instrucciones De Uso

Reading the Therapy
Time
Adjusting the
Garment Removed
from the Limb Alarm
1. Hours are displayed when the pump is powered
on.
2. When the pump is in Run State, press the Right
Control button to display the minutes. Minutes are
displayed for 5 seconds. Hours resume being
displayed automatically.
1. When the pump is in standby and without a
garment attached, press the middle control button
for 2 seconds to enter the garment removed alarm
setting mode.
2. Press the left control button to cycle through the
options:
• alert enabled but no audible alarm
• alert enabled with audible alarm
• alert disabled.
3. Press the middle button again to save the desired
setting and return to the standby menu.
21