Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Major Revision
Standby Screens
3. During the last part of the initialisation process, the
software version will be displayed, comprised of:
• Major revision in top left.
• Minor revision in bottom right.
This screen shows software version "V1.047".
4. At the end of the successful diagnostic test, the
"No Garments" Standby screen is displayed.
5. The Therapy Time value can now be reset by
pressing the Right Control button (refer to
"Resetting the Therapy Time" on page 20).
6. The alarm volume can also be set by pressing the
Left Control button (refer to "To Change the
Audible Alarm Volume Setting" on page 20).
The "No Garments" Standby screen (above) shows two
leg icons on the left side of the LCD screen with no
garment outlines on them, indicating that no garments
are currently connected to either tubeset.
NOTE
The Start Therapy icon does not appear until at least
one garment is connected to a tubeset connector.
Apply the prescribed Arjo garment(s) to the patient by
following the instructions on the garment(s).
NOTE
Do not re-use the garments. Do not use the garments
on multiple patients.
Connect the garment(s) to the pump by pushing the
garment connector firmly into the pump tubeset
connector until it "clicks".
The pump LCD screen will show which garments are
connected to each tubeset connector: the garment
connector with the blue push button is "1" and the one
with the orange push button is "2" (refer to "Garment
Type and Inflation Indication" on page 10).
14
Minor Revision
Publicidad
Tabla de contenido
