Configuration With The Balluff Engineering Tool (Bet); Balluff Engineering Tool (Bet); Connect Units - Balluff BTL PA0400 Serie Manual De Instrucciones

BTL PA0400- _ _ _ _ -C15A _ _ _ _ -000S15
Magnetostrictive Linear Position Sensor – Profile Style
7

Configuration with the Balluff Engineering Tool (BET)

7.1

Balluff Engineering Tool (BET)

NOTICE
Interference in function
Configuration with the BET while the system is running
may result in malfunctions.
► Stop the system before performing the configuration.
The BTL can be quickly and easily configured on the PC
using the PC software BET.
The PC software and the relevant configuration
guide can be found online at www.balluff.com
on the product page.
7.2

Connect units

The units must be connected for configuration with the
BET (see Fig. 7-1).
PC (with BET)
IO-Link master
Power supply
Fig. 7-1: Connection of units
► Connect BTL to the master.
► Optional: Also connect outputs to the control (PLC) via
the adapter cable (accessory).
► Connect PC (with BET) to the master.
14 english
BTL
PLC
(optional)