Troubleshooting - SPORTSTECH VP500 Manual De Usuario

Phenomena
Unable to start work
Machine noise like pinging
and dada.
The remote control doesn't
work
Stop working when using
Unable to operate normally • Maybe you execute
Error code "ER01" or
"ER02" is shown on the
display.
If the breakdown has not been solved after following the above methods, please contact the
manufacturer or your local dealer, and do not disassemble and maintain the device by yourself.

TROUBLESHOOTING

Common reasons
• Power plug didn't connect well
• power switch not turned on
• Fuse was burned out due to
abrupt excessive current
• It is normal operation sound,
not indicating a machine
breakdown
• Battery is dead
• The control distance is too far
• Default working time is over
commands too frequently
• The voltage of the operational
motor is too high.
43
Methods
• Connect the power plug
• Turn on the power switch and
the indicator light will come up.
• change to a fuse of the same
model
• Don't need to deal with
• Replace the battery
• The effective infrared sensing
range is 2.5m
• After a break of 10 minutes, try
again.
• turn off the power and restart
• Switch off the device, dis-
connect it from the power
supply and restart, contact your
dealer if necessary
EN