Replacing The Boom Actuator - Invacare Reliant 450 Manual Del Usuario

A soft cloth, dampened with water and a small amount of mild detergent, is all that is needed to clean the patient lift. The lift can be
cleaned with non-abrasive cleaners.

10.5 Replacing the Boom Actuator

1. Remove the nut, washer, and shoulder bolt that secure the electric actuator to the mast mounting bracket.
2. Rest the boom on your shoulder and remove the nut, bolt, and pinch guard from the boom mounting bracket.
3. Remove the actuator assembly.
4. Reverse the steps for installation.
CAUTION!
DO NOT overtighten the nut and bolt. This damages the mounting bracket.
1078987-O
10 Maintenance
53