Midea MGS30S2AST Instrucciones De Instalación página 17

Countertop surfaces immediately around installation space must be flat
and level for proper installation.
This appliance must not be installed with a ventilation system that
blows air downward toward the range. This type of ventilation system
may cause ignition and combustion problems with the gas cooking
appliance resulting in personal injury or unintended operation.
When the floor covering (hardwood flooring, tile, carpet, etc.) ends at
the front of the range, the area that the range will be installed on must
be built up with plywood to the same level or higher than the floor
covering. This will allow the range to be moved for cleaning and servicing,
as well as provide proper air flow to the range.
Ensure floor covering material can resist temperatures of at least 167 °F
(75 °C). Ensure the wall coverings, countertops, cabinets, and any other
materials in contact with the range can resist the heat generated up to
194 °F (90 °C) by the range.
Side
Clearance
Above
Cooking
Surface to
wall
6"(15.2cm)
(61cm)
36"
Lower
(91.4cm)
Cabinet
Depth
SLIDE-IN CUTOUT
Hatched Faces
Should be flat
and Leveled.
30"
6"
(15.2cm)
(45.7cm)
24" 0"(0cm)
Clearance
Below
Cooking
Top and
at Rear
and Sides
of Range
"
2 "
"
23 "
/16
1 /2
" min
13"(33cm)
30"
Overhead
(76.2cm)
Cabinet
Depth
30"
18"
(76.2cm)
23"
(58.9cm)
FREESTANDING CUTOUT
"
/
25"
25"
GAS SUPPLY
11"
AREA
0"
(15.2cm)
4"
4"
22"
11"
ELECTRIC SUPPLY
AREA
7"
2"
17