Important - Midea MGS30S2AST Instrucciones De Instalación

• Check that the gas supply line is not damaged.
• Check to make sure the back leg of the range
has engaged properly into the anti-tip bracket.
If visual inspection is not possible:
o Slide range forward
o Confirm anti-tip bracket is securely attached
to floor or wall in correct position according
to installation instructions.
o Fully slide the range back against the wall so that leveling leg engages
with anti-tip bracket.
• To ensure baked goods, such as breads and cakes, come out even and
level, confirm that the range is level by placing on the center rack
position. Check level both front-to-back and side-to-side. Use
adjustable pliers to adjust leveling legs as necessary to level the range.
o IMPORTANT: The weight of the product is to be supported by the
leveling legs. When adjusting leveling legs, do not adjust so far that
the weight of the product is supported by the cooktop resting on the
countertop.
o If countertops are not level, leveling the range may cause one or
more corners of the cooktop to not contact the countertop surface.
If this happens, range can remain unleveled to allow cooktop to
contact countertop around entire perimeter. Just be advised that
this may affect performance for some baked goods. Although not
generally recommended, in these cases foam tape rated for 194 °F
(90 °C) minimum can be placed around countertop edge to fill the
gap caused by leveling. Do not use caulking or other adhesives that
would bind the cooktop to the counter.
• Reinstall door, drawer, and oven racks.
31