About These Instructions; Warning Messages; Further Symbols And Displays; Abbreviations - Orbitalum GFX 3.0 Traducción Del Manual De Instrucciones Original

GFX 3.0, GFX 6.6
1.

ABOUT THeSe INSTRUcTIONS

1.1

Warning messages

The warning messages used in these instructions warn you of injuries or damage to property.
X Always read and observe these warning messages!
WARNING SYMBOL
WARNING LeVeL SYMBOL MeANING
DANGeR!
WARNING!
ATTeNTION!
NOTe!
1.2

Further symbols and displays

cATeGORY SYMBOL MeANING
INSTRUcTION
INFO
AcTION
1.
2.
...
X
1.3

Abbreviations

ABBReVIATION
GFX 3.0
GFX 6.6
[REV. 20200320] OC_GFX_BA_790144761_00__INH-02_EN
This is a warning symbol. It warns you of the danger of injury. In order to avoid injuries or death
observe the measures marked with a safety sign.
Imminently hazardous situation that results in death or serious injuries if the safety
measures are not observed.
Potentially hazardous situation that may result in death or serious injuries if the safety
measures are not observed.
Potentially hazardous situation that may result in slight injuries if the safety measures are not
observed.
Potentially hazardous situation that may result in material damage if the safety measures are
not observed.
You must take notice of this symbol.
Important information for comprehension.
Request for action in a sequence of actions: Action is required here.
Single request for action: You have to do something here: Action is required here.
MeANING
Pipe cutting and beveling machine for tubes having up to 3" outer diameters
Pipe cutting and beveling machine for tubes having up to 6.6" outer diameters
About these instructions
Orbitalum Tools GmbH D-78224 Singen www.orbitalum.com
eNGLISH
39