About These Instructions; Warning Messages; Further Symbols And Displays; Abbreviations - Orbitalum ORBIMAT 300 SW Traduccion Del Manual De Instrucciones Originales

ORBIMAT 300 SW
1.

ABOUT THESE INSTRUCTIONS

1.1

Warning messages

The warning messages used in these instructions warn you of injuries or damage to property.
Always read and observe these warning messages!
This is the warning symbol. It should warn you against dangers of injury. In order to avoid injuries or
death observe the measures marked with a safety sign.
WARNING LEVEL MEANING
Imminently hazardous situation that results in death or serious injuries if the safety measures are
DANGER!
not observed.
Potentially hazardous situation that may result in death or serious injuries if the safety measures
WARNING!
are not observed.
Potentially hazardous situation that may result in slight injuries if the safety measures are not
CAUTION!
observed.
NOTE! Potentially hazardous situation that may result in material damage if the safety measures are not
observed.
1.2

Further symbols and displays

SYMBOL MEANING
Important information for comprehension.
1. Request for action in a sequence of actions: Action is required here.
2.
3.
...
Single request for action: Action is required here.
1.3

Abbreviations

ABBREVIATION MEANING
OM, SW ORBIMAT, Type "SmartWelder"
1.4

Further applicable documents

The following documents apply together with these operating instructions:
• Operating instructions of the orbital weld head
(14.01.21) OW_ORBIMAT_300SW_BA _852060202_00_EN ORBITALUM TOOLS GMBH, D-78224 SINGEN, W W W.ORBITALUM.COM, PHONE +49 (0) 77 31 792-0
EnGLISH
81