Accessories - Orbitalum GFX 3.0 Traducción Del Manual De Instrucciones Original

eNGLISH
Product design
3.3

Accessories

Not included as standard.
WARNING!
Saw blades and bevel
cutters
Saw blade lubricant GF TOP
Saw blade lubricant GF LUB
Quick-mounting plate with
screw clamps
Tripod
48
ORBITALUM TOOLS GmbH D-78224 Singen www.orbitalum.com
Danger presented by using poor-quality accessories and tools not approved by
Orbitalum!
Diverse physical injuries and material damage.
X Use only original tools, spare parts, materials, and accessories from Orbitalum.
All saw blades and bevel cutters by Orbitalum Tools are specially
developed for our tube and pipe cutters to endure maximum strain
and have a maximum tool life. A selection of 4 different saw blades
and bevel cutters are available for various uses:
• economy range for low and non-alloy steels and cast iron
tubes
• Performance range for high-alloy steels (stainless steel)
• High-Performance range for high-performance materials
and high-alloy steels
• Premium range especially made for stainless steel applica-
tions with extra long durability
• Synthetic high-performance lubricant for cutting and beveling
machines.
• Increases the tool life of the saw blade.
• Meets the requirements for H2 lubricants.
• The screwable brush guarantees an easy and uniform applica-
tion of lubricant on the saw blade.
• Chlorine-free high-performance lubricant for cutting and
beveling.
• Increases the tool life of the saw blade.
• This ecologically cutting compound is the environmentally
friendly replacement for ROCOL: just with a new name and
improved quality.
• GF LUB meets the latest environmental directives and ecolog-
ical standards.
• To quickly fit machines to workbenches.
• Ideal if changing location often.
• Suitable for GFX 3.0, PS 4.5, PS 6.6.
• Made of aluminum.
• For easy mounting of PS machines directly on the tripod with
no base plate.
• Space saving – fast application – easy handling.
GFX 3.0, GFX 6.6
Code 790 060 228
Code 790 041 016
Code 790 041 027
Code 790 048 390
[REV. 20200320] OC_GFX_BA_790144761_00__INH-02_EN