Initial Operation; Checking The Parts Of Delivery; Included With The Machine; Storage And Transport - Orbitalum GFX 3.0 Traducción Del Manual De Instrucciones Original

eNGLISH

Initial operation

6. INITIAL OPeRATION
6.1

checking the parts of delivery

• Check delivery for completeness and damage caused by transport.
• Report any missing parts or damage caused by transport to your supplier immediately.
6.2

Included with the machine

Subject to modifications.
PcS. ARTIcLe
1 Pipe cutting and beveling machine
1 Wooden transportation crate
1 Saw blade, Code 790 ...
1 Quick-mounting plate without screw clamps*
1 Set of stainless steel caps**
1 Line laser with holder and fastening screws***
1 Tool key set
1 Tube of saw blade lubricant GF TOP (Code 790 060 228)
1 Set of operating instructions and spare parts list
* The GFX 3.0 can be mounted directly on the workbench without a quick-mounting plate. Quick-mounting plates with screw clamps for GFX 3.0 and GFX 6.6 are available
optionally.
** Already mounted on the sliding clamping jaws of the GFX at delivery.
*** The line laser has to be mounted on the GFX before commissioning (mounting, see chap. 8.2, p. 58).
7.

STORAGe AND TRANSPORT

ATTeNTION!
DANGeR!
WARNING!
WARNING!
54
ORBITALUM TOOLS GmbH D-78224 Singen www.orbitalum.com
Incorrect machine storage!
Diverse physical injuries and material damage.
X Store the machine in its original crate in a dry environment.
Fatal electric shock!
X Before transportation or changing the workplace, switch off the machine, wait until the
machine/tool stops running and pull the mains plug.
During transportation, the ON/OFF switch may unintentionally be activated
causing the machine to start up!
Diverse physical injuries and material damage.
X Before transportation or changing the workplace, switch off the machine, wait until the
machine/tool stops running and pull the mains plug.
Heavy weight when transporting the machine!
Danger of being injured through.
X Transport the machine over long stretches with corresponding lifting aids.
GFX 3.0 GFX 6.6
x x
x x
... 041 035 ... 042 064
– x
x x
x x
x x
x x
x x
[REV. 20200320] OC_GFX_BA_790144761_00__INH-02_EN
GFX 3.0, GFX 6.6