Operating Concept; Operation Via Push Switches (Softkeys); Operation Via Touch Screen; Operation Via Rotary Knob - Orbitalum ORBIMAT 300 SW Traduccion Del Manual De Instrucciones Originales

ORBIMAT 300 SW
3.2

Operating concept

The main control elements are the 6 push switches, whose current function assignment is displayed at the bottom mar-
gin of the display, the touch screen and the rotary knob. Direct access to standard functions (e.g. "Start" and "STOP")
is always possible. The entry of text is optionally possible using a keyboard that can be connected externally. If faults
occur (e.g. failure of the rotary knob or softkeys), the machine can be operated completely using the external keyboard.
3.2.1

Operation via push switches (softkeys)

The six push switches (Items 1 - 6) are assigned with
standard functions as softkeys.
Examples:
The push switch (Item 6) is usually assigned the "Menu"
function, meaning pressing it brings you directly to the
main menu, regardless of which sub-menu currently ap-
pears in the display. The push switch
(Item 3) is assigned the "Save" function. This allows a pro-
cedure change to be saved rapidly.
3.2.2

Operation via touch screen

Rapid and efficient operation via touch screen. Directly
touch the values to be changed. A virtual keyboard is
displayed. Operation while wearing protective gloves only
possible to a limited extent and not recommended.
3.2.3

Operation via rotary knob

The rotary knob (Item 8) has either a fine or rough detent
when being turned, depending on whether you are
navigating between menu items/fields (rough detent) or
setting parameter values (for example weld current) (fine
detent).
Navigating to a menu item/field in the display:
X Turn the rotary knob.
The menu item/field appears in blue.
(14.01.21) OW_ORBIMAT_300SW_BA _852060202_00_EN
7
ORBITALUM TOOLS GMBH, D-78224 SINGEN, W W W.ORBITALUM.COM, PHONE +49 (0) 77 31 792-0
1
2
3
4
5
6
8
EnGLISH
91