Troubleshooting - universalblue UBE2413-21 Manual De Instrucciones

3. Wipe up dirt or spilled
liquid with a cloth or
paper towel.
4. Follow steps 2-4 above
for "Daily Dirt on Glass".
Liquids 1. Turn off the hob.
spilled on 2. Dry the liquid.
the touch 3. Wipe the touch control
controls area with a clean, damp
cloth or sponge.
4.
completely with a paper
towel.
5. Turn the hob back on.
10.

TROUBLESHOOTING

Problem
The hob cannot
be turned on.
Touch controls
do not respond.
Touch controls
are difficult to
use.
Cracks appeared
in the glass.
Dry the area
Possible
causes
There is no
electric current.
The controls are
locked.
There may be a
slight film of
water over the
controls or you
may be using the
tip of your
finger when
touching the
controls.
Use of utensils
with irregular
base.
- The hob may beep and turn itself
off, and the touch controls may not
work when there is liquid on them.
Be sure to dry the touch control area
before turning the plate back on.
What to do
Make sure that the hob is connected to
the power supply and that it is turned on.
Check if there is a power outage in your
home or area. If you have checked
everything and the problem persists,
contact a qualified technician.
Unlock the controls. See "Using the hob"
for instructions.
Make sure the touch control area is dry
and use your fingertip when touching the
controls.
Use cookware with flat, smooth bases.
See the section "Choosing the right
utensils". See
maintenance" section.
"Cleaning and
56