universalblue UBE2413-21 Manual De Instrucciones página 63

Check with an electrician whether the domestic wiring
system is suitable without alterations. A suitably qualified
electrician should only make any alterations.
If the cable is damaged or needs to be replaced for other
reasons, an after-sales technician using the appropriate tools
in order to avoid any accidents must carry out the operation.
If the appliance is connected directly to the mains, it's
necessary to install an unipolar circuit breaker with a minimum
opening of 3mm between contacts.
The installer must ensure that the electrical connection is
correct and complies with applicable safety regulations.
The cable must not be bent or compressed.
The cable must be inspected regularly and should only be
replaced by an authorized technician.
If the circuits reach a high temperature due to a deficient
ventilation, it is a clear sign that the hob has been incorrectly
installed. The first sign of this is a power reduction. Even if the
system recovers, it is advisable to remove the device and
reinstall it. In the event of incorrect installation, the
manufacturer cannot be held responsible for any problems
63