Care & Cleaning; Replacing The Water Filter - Breville the Dual Boiler BES920 Manual De Instrucciones

Care & Cleaning
CLEANING CYCLE
• CLEAN ME! will be displayed on the
LCD to indicate when a cleaning cycle
is required (approx. 200 shots).
• Insert the 1 CUP filter basket into the
portafilter, followed by the supplied
cleaning disc, followed by 1 cleaning tablet.
• Lock the portafilter into the group head,
ensuring it is rotated to the right until
the handle is securely locked in place.
• Ensure the water tank is filled with
cold water and empty the drip tray.
• Press MENU button until 'CLEAN CYCLE'
flashes and 'PUSH' is displayed on the LCD.

REPLACING THE WATER FILTER

1
2 2
Set current month Assemble water
filter parts
The provided water filter helps prevent
scale build-up in and on many of the inner
functioning components. Replacing the water
filter after three months or 10.6 USgal / 40L
will reduce the need to descale the machine.
The limitation of 10.6 USgal / 40L is based on
water hardness level 4. If you are in level 2 area,
you can increase this to 16 USgal / 60L.
4
3
Ensure parts are Install filter in
tank
connected
• To start the cleaning cycle, press the
illuminated MANUAL button.
• 'CLEAN CYCLE' will flash and the machine
will start to countdown from 370 seconds.
• When the cleaning cycle has finished,
remove the portafilter and ensure the
tablet has completely dissolved. If the
tablet has not dissolved, repeat the steps
above, without inserting a new tablet.
• The cleaning cycle is now complete. Rinse
the portafilter and filter basket thoroughly
to remove any tablet residue before using.
5 6
Fill tank and wait Install water tank
for 5min to soak
filter
NOTE
To purchase water filters, visit
Breville webpage.
WARNING
Do not immerse power cord, power plug
or appliance in water or any other liquid.
The water tank should never be removed or
completely emptied during descaling.
!
Replace filter after
90 days or after
40L (10. US GAL)
23