Adjusting Current Time; Daily Timer; Filing - Teac T-H500 Manual Del Usuario

Adjusting Current Time

You can adjust the current time regardless
of power on/off.
1
Press the time adj button.
Then "Hour display" indicator will blink.
2
Set the hour to "10" (o'clock) using
tuning/select knob
3
Press the next button.
Then "Minute display" indicator will
blink.
4
Set the minute to "55" (minutes).
5
Press the next button.
OIf you press the time adj button after or
during the minute adjustment,
adjustment will be completed.
OIf you don't proceed to the next
operation within 8 seconds after "Hour
display" indicator begins to blink, current
time adjustment will be cancelled.

Daily Timer

1
Press the daily button.
Presetting ON time: AM 7:15
2
Preset the ON timer by using
tuning/select control and the next
button.
3
Press the next button.
Presetting OFF time: AM 9:30
4
Preset the OFF timer by using
tuning/select control and the next
button.
5
Press the next button and the timer
button.
Presetting is completed.
Current Time
* Daily timer makes the system turn on and
off at preset times every day.
* If you want to record at ON time, select
the desired source with the input
selector on the amplifier (A-H500) and
then set the timer switch on the cassette
deck (R-H500) to the rec position.
* If the timer indicator "
daily timer doesn't work.
* While setting the daily timer, if the next
button is held depressed, the timer
function will be cancelled.
_ 8 _

Filing

For example)
FM 98.80 MHz, Preset Ch 01.
Station name : BBC 1
1
Select channel 01 in the preset tuning
mode.
2
Press the file button long (for more than
1.5 seconds).
Then "----" will be displayed in the clock
indicator.
3
Select "B" with the tuning/select
control.
4
Press the next button, and then the
cursor will move one space.
5
After selecting "BBC 1" with the
tuning/select control and the next
button, press the next button.
6
Press the memory button, and then the
broadcasting station name will be
changed to "BBC 1".
O File display and clock display
" is off, the
While the clock is being displayed,press
the file button briefly; the clock display will
be switched to the file display.
Press the file button briefly again to
resume.