Re-Commissioning After A Standstill - Bosch Rexroth HD 2 Instrucciones De Montaje

26/38 Commissioning
1
Life stage ), location
5 2 Workpiece pallet:
9 Improper setting of the
adjusting throttle will cause
the lifting plate to strike the
end stop hard.
6 2 Workpiece pallet:
9 Improper adjustment of
the angle of rotation can
cause workpiece pallet to be
incorrectly oriented on the
belt section
1
) Life stages of the machine according to EN 12100 Sect. 5.4 a /b (No. 1- 27), Sect. 5.4 a (see page 9)
5
Bosch Rexroth AG, MIT: HD 2, 3 842 358 735/2019-10
Situation Hazard
Body parts can get
caught by falling
workpiece pallet
758 735 11

8.3 Re-commissioning after a standstill

Follow the steps outlined for the initial commissioning.
Action
Crushing Only relevant during the adjustment process.
No special action required.
5, 6
758 735-13