Maintenance - Bosch Rexroth HD 2 Instrucciones De Montaje

32/38 Maintenance and repair
Please note:
• Only lift rotate units with
a rotation angle of 90 °
are equipped with the
coupling.
At a rotation angle of
180 °, this component is
made of solid material.
• When disassembling and
assembling the parts,
always observe the order
described in section 10.4
"Replacing wear parts".
Bosch Rexroth AG, MIT: HD 2, 3 842 358 735/2019-10

10.3 Maintenance

Failure of the lift rotate unit due to non-compliance with the maintenance cycles
The HD 2 lift rotate unit must be lubricated using 5997287000 ISO-FLEX TOPAS NCA 52
grease at least once a year or after 3 million cycles.
There is a risk of damage to property, and the service life may be reduced if the
maintenance intervals are not complied with.
ISO-FLEX
TOPAS
NCA 52
Fig. 13: Lubrication points
NOTICE
ISO-FLEX
TOPAS
NCA 52
358 735-15