Visualizing Needles - FujiFilm SonoSite X-Porte Manual Para El Usuario

6 To change the file name, tap the
new file name using upper and lower-case letters and numbers only. Special characters and
spaces cannot be used in a file name.
Note:
7 If more than one storage device is installed, tap to select the storage device you want to export to.
8 By default, patient information such as names and IDs are removed from images and clips before
exporting. Patient information can be included during export by selecting the
information on images and video clips
Caution:
9 Tap Export .
Export

Visualizing needles

Steep Needle Profiling can be used with both linear and curved transducers on the X-Porte system.
WARNING:
For curved transducers, Steep Needle Profiling is available in 2D full-screen imaging only and for the
Musculoskeletal
12
Please enter a file name
All images and clips exported to the USB memory stick are stored on the root level of
the drive. This is to facilitate viewing in Image Gallery. Files with the same name will
have the name automatically incremented.
Patient information maybe a protected class of patient data subject to
country-specific security guidelines. If you choose to include patient information
when exporting images and clips, be sure your information storage and handling
practices comply with country-specific security guidelines.
Due to the inherent geometry of curved arrays, only segments of the needle shaft
may show in the image. Use movement and fluid injection to help verify the needle
tip location.
and Nerve exam types.
box. When the keyboard appears, type the
check box.
Include patient