Replacing The Main Fuse; Replacing The Fuse For The Lights (250-300 Se/R); Removing The Headlight Housing - SHERCO 250-300 SE/R 2013 Manual Del Propietário

250-300 SE/R
electrical system maintenance (continued)

rePlaCing THe Main FUse

rePlaCing THe FUse FOr THe ligHTs (250-300 se/r)

reMOving THe HeadligHT HOUsing

1
2
120
All manuals and user guides at all-guides.com
1
1
Remove the seat ( p.100)
☛
The main fuse is on a relay by the starter.
1
Remove the defective fuse and replace with a
new fuse of the same value.
Main fuse 30A
Put a new spare fuse in the reserve location in
the fuse box.
- Replace the saddle (
Remove the seat ( p.100)
☛
The light fuse is located in a high location on
1
the wiring harness on the right side of the bike.
Remove the defective fuse and replace with a
new fuse of the same value.
Light fuse 15A
- Replace the saddle (
Turn the ignition to the off position.
Unclip the left and right rubber fastners
each side of the fork.
Separate all of the brake hoses / cables from the
meter bracket at the top and bottom.
Move the top plate up to clear the housing.
Disconnect the connector
theheadlight housing.
p.100).
☛
p.100).
☛
on
1
and remove
2