Publicidad
Idiomas disponibles
Idiomas disponibles
Using the machine
* The needle is brought to its upper end by aligning the
" " marking on the side of the front cover with the " "
marking on the handwheel.
B
A
13
Handwheel
The handwheel turns forward, i.e. in the same direction as on
a household sewing machine.
Two step presser foot lifter with integrated front
foot lift
To raise the presser foot, lift the presser foot lever on the rear
of the machine, until it engages (A). It can be raised again to
the maximum height and held in this position to provide more
space between presser foot and stitch plate (B).
When the foot is raised (A and B), the front of the foot is au-
tomatically lifted.
Note: When the presser foot is raised, all the tensions are
released making it easier to thread the machine.
How to use the knee lifting lever
You can lift/lower the presser foot without taking your hands
off the material.
1. Insert the protruding part of the knee lifting lever into the
recessed part of the mounting hole.
2. Press the knee lifting lever to the right to lift the presser
foot, or to the left to lower it.
* Do not touch the knee lifting lever during sewing. If you
touch it, the presser foot will go up to cause a deformation
of the seam.
Publicidad
