Publicidad
Idiomas disponibles
Idiomas disponibles
Adjustments and settings
A
B
Adjusting the stitch width finely
This sewing machine automatically controls the thread
tension. It should be remembered, however, that in some
cases the stitch formation can be improved by turning
the looper thread tension fine adjustment knob clockwise
or counterclockwise according to the type of material or
thread and the differential feed adjustment amount.
A If the looper thread tension is too low
→ Turn the knob clockwise.
B If the looper thread tension is too high
→ Turn the knob counterclockwise.
WARNING
Do not carry out sewing with a marking pin
stuck in the material. In addition, do not
attempt to cut anything other than fabric and
thread with the upper/lower knives. Be aware
that doing so can cause needle break or per-
sonal injury.
18
Publicidad
