COMEM DTI Manual De Instrucciones página 11

Programming of the device
Selection of the baud rate
This setting is significant only for eDTI model.
This setting is indicated on displays with:
• BDR on T1-T2 display
• value to set on T3-T4 display.
With ← and → keys select the baud rate
It's possible to choose between the following values: 2,4 - 4,8 - 9,6 - 19,2 kbps.
Confirm with ENTER.
Baud rate setting
Baud rate: 19200
Baud rate: 9600
Baud rate: 4800
Baud rate: 2400
Selection data bit and stop bit
This setting is significant only for eDTI model.
This setting is indicated on displays with:
• the type of parity on T1-T2 display
• the number of data bit and stop bit on T3-T4 display.
With ← and → keys select the options.
Confirm with ENTER.
Data-stop bit setting
No parity / 8 data bit - 1 stop bit
No parity / 8 data bit - 2 stop bit
Even parity / 8 data bit - 1 stop bit
Odd parity / 8 data bit - 1 stop bit
NOTE
NOTE
T1-T2 display
BDR
BDR
BDR
BDR
T1-T2 display
NO
NO
EVE
ODD
T3-T4 display
19.2
9.6
4.8
2.4
T3-T4 display
8-1
8-2
8-1
8-1
11