Publicidad
Idiomas disponibles
Idiomas disponibles
Technical features
Auxiliary power supply
Maximum consumption
Measured inputs
Interval of measure
Interval of visualization
Tripped delay-hysteresis
Measured visualization
Outputs
Output functions
programmable functions
Connection
Insulation
Protection degree
Dimensions - enclosure
Working temperature
Storing temperature
Standards
Management software for eDTI Contact us at: customerservice@it.comem.com
Storage
The DTI/eDTI temperature monitoring devices are shipped inside a cardboard box
to facilitate transport and storage. As soon as the temperature monitoring device
DTI is received, the customer must perform the following operations:
• examine the outer packaging surface to be sure that it is intact
• check that there are no breakages
If damage is found, please contact COMEM and provide the shipping data
together with the serial number of the unit.
The temperature monitoring device DTI/eDTI must be stored in a dry place at
temperatures as indicated above.
24/230 V dc/ac ±15% 50-60 Hz
4 VA
3 - 4 inputs by RTD PT100 (max wire resistance 20 Ω)
-30°C up to +200°C / precision ± 2°C
-30°C up to +220°C
5 seconds – 2°C
2 displays with led 7 segments, 3-digits
DTI: 4 relay NO-C-NC (250 V 5 A resistive load)
eDTI: 4 relay NO-C-NC (250 V 5 A resistive load),
0-20 mA or 4-20 mA (Default); Modbus RTU
alarm, trip, fan, auto-diagnostic
ALARM, TRIP, HOLD, FAN, T.MAX, HOT, FDC
Extractible terminal with screws, section wires max 2.5 mm
2500 Vrms 50 Hz per 60 s :U aux - input PT100 /
U aux - relay outputs / inputs PT100 - relay outputs
IP52 front panel, IP20 rear panel, as CEI-EN 60529
Flash mounting DIN 96x96 mm, depth 120 mm /
Enclosure thermoplastic self-extinguishing as UL94 V0
-10°C up to +60°C, humidity max 95%
-25°C up to +70°C
Security: EN 61010-1
EMC: EN 61000-4-2; EN 61000-4-3; EN 61000-4-4;
EN 61000-4-5; EN 61000-4-11; EN 61000-6-4
2
17
Publicidad
