COMEM DTI Manual De Instrucciones página 9

Programming of the device
Selection of the number of active inputs
It is possible to select the number of activated inputs. It's possible to choose
between 3 and 4 inputs enabled; if there are 3 inputs enabled the T4 display
remain off.
Select 3 or 4 inputs with ← and → keys.
Confirm with ENTER.
Active inputs mode
3 inputs activated
All inputs activated
Control ventilation
The FAN led will switch on indicating the programming of the ventilation control.
If 3 inputs are selected the following setting are available:
• ventilation control inhibited
• fan control active on 3 inputs
Select the configuration with ← and → keys.
Confirm with ENTER.
Fan mode (3 inputs)
Fan control inhibited
Fan control on 3 inputs
If 4 inputs are selected the following setting are available:
• ventilation control inhibited
• fan control active on 3 inputs
• control active only on fourth input
Select the configuration with ← and → keys.
Confirm with ENTER.
Fan mode (3 inputs)
Fan control inhibited
Fan control on 3 inputs
Fan control on 4 inputs
T1-T2 display
Ch
Ch
T1-T2 display
FAN
FAN
T1-T2 display
FAN
FAN
FAN
T3-T4 display
123
ALL
T3-T4 display
Off
ON
T3-T4 display
Off
ON
4
9