Publicidad
Idiomas disponibles
Idiomas disponibles
allow for safe handling and control of the
tool in unexpected situations.
5. Battery tool use and care
a. Recharge only with the charger specified
by the manufacturer. A charger that is suit-
able for one type of battery pack may create
a risk of fire when used with another battery
pack.
b. Use power tools only with specifically
designated battery packs. Use of any other
battery packs may create a risk of injury and
fire.
c. When battery pack is not in use, keep it
away from other metal objects like paper
clips, coins, keys, nails, screws, or other
small metal objects that can make a con-
nection from one terminal to another.
Shorting the battery terminals together may
cause burns or a fire.
d. Under abusive conditions, liquid may be
ejected from the battery, avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
1. Guarding-related warnings
a. Keep guards in place. Guards must be in
working order and be properly mounted.
A guard that is loose, damaged, or is not
functioning correctly must be repaired or
replaced.
b. Always use saw blade guard, riving knife
and anti-kickback device for every through-
cutting operation. For through-cutting oper-
ations where the saw blade cuts completely
through the thickness of the workpiece, the
guard and other safety devices help reduce
the risk of injury.
c. Immediately reattach the guarding system
after completing an operation (such as rab-
beting, dadoing or resawing cuts) which
requires removal of the guard, riving knife
and/or anti-kickback device. The guard,
1609B07947GTS18V-08 OSI 08-2022.indd 5
General Power Tool Safety Warnings
Safety Instructions for Table Saws
SAVE THESE INSTRUCTIONS
e. Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behavior
resulting in fire, explosion or risk of injury.
f. Do not expose a battery pack or tool to
fire or excessive temperature. Exposure to
fire or temperature above 265 °F may cause
explosion.
g. Follow all charging instructions and do not
charge the battery pack or tool outside
the temperature range specified in the
instructions. Charging improperly or at
temperatures outside the specified range
may damage the battery and increase the
risk of fire.
6. Service
a. Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
b. Never service damaged battery packs.
Service of battery packs should only be per-
formed by the manufacturer or authorized
service providers.
riving knife, and anti-kickback device help to
reduce the risk of injury.
d. Make sure the saw blade is not contacting
the guard, riving knife or the workpiece
before the switch is turned on. Inadvertent
contact of these items with the saw blade
could cause a hazardous condition.
e. Adjust the riving knife as described in this
instruction manual. Incorrect spacing, po-
sitioning and alignment can make the riving
knife ineffective in reducing the likelihood of
kickback.
f. For the riving knife and anti-kickback
device to work, they must be engaged in
the workpiece. The riving knife and anti-
kickback device are ineffective when cutting
workpieces that are too short to be engaged
with the riving knife and anti-kickback
device. Under these conditions a kickback
-5-
8/3/22 2:44 PM
Publicidad
