Be sure to wear tight-fitting clothing without any
loose parts. Never wear open or unfastened
jackets, shirts or overalls.
To prevent accidents and ensure best performance the machine must not be modi-
fied or altered unless authorised by the manufacturer. Nor must it be used in condi-
tions or for purposes other than those for which it has been expressly designed. Any
arbitrary modification implemented in this machine will automatically exempt the manufac-
turer from any liabilities for ensuing damage or injury.
This Machine has been planned and manufactured in conformity with EU directives
2006/42/CE, 2014/30/UE and the regulation 1935/2004/CE.
BE SURE TO READ "IMPORTANT" MESSAGES
Information highlighted as "Important" in the Operator's Manual and/or machine indicate
specific instructions about settings, maintenance and so on. Failure to comply with these
instructions may lead to damage to the machine.
For your own personal safety, before connecting the machine to mains:
• check that power mains leading to distribution socket is fitted with an appropriate multipolar
switch protected against overloads and shortcircuits.
• carry out all phase connections, as well as any neutral and ground connections (compul-
sory) with a standard plug compatible with the above mentioned socket. The protection lead
(ground) is the one with the yellow/green insulating sheath; make sure that the power sup-
ply cable is appropriate to its use, according to length, mains voltage and machine con-
sumption.
• unless adequate protections against electrical shock are fitted, do not operate the machine
in damp or wet environments.
Strictly do not start up the machine without the protective panelling. This may jeopar-
dise personnel safety and machine serviceability.
All manuals and user guides at all-guides.com
WEAR ADEQUATE CLOTHING
IMPORTANT
ELECTRICAL SHOCK
17