Gima 32924 Manual Del Usuario página 31

31
• Relax your arm and turn your arm upward.
• Make sure there are no kinks in the air tube.
*Note!
• Fit the cuff snugly, leaving enough space for 1 inch (2 ~ 3 cm) between the inner elbow
and the lower edge of the cuff, or the measurement may not be accurate.
• This monitor comes with one size of arm cuff: 9" ~ 13" (23 ~ 33 cm).
• In case the cuff kept pumping up non-stop, open the cuff at once.
• Do not wrap the cuff around any body part other than your arm.
• The device is not supposed to be used when your arm is wounded or injured.
MEASUREMENT PROCEDURE
Switch on the monitor
A. Press button to switch on the monitor.
B. All segments appear on the screen.
Setting year, date and time
A. Press button ("YEAR" flashes). Press
to adjust YEAR value.
B. Press button ("MONTH" flashes). Use
(1, 2, 3,......, 12).
C. Adjust DATE (1, 2, 3,..., 31), HOUR (1, 2, 3,........12
(00,01,02,03,.....59) as described in Step A above.
When settings are done, press
The device is ready for use.
Taking a Measurement
A. Before measurement, press
B. With the cuff wrapped around your arm, press
All display units appear on the screen.
+
+
button to confirm the entries.
+
button to select User 1, 2, or 3.
ENGLISH
button
button to adjust MONTH
,1 ,..., 12) and MINUTE
PM PM
button to start measurement.