Kuppersbusch BD6340 Instrucciones De Uso página 30

• Rotate the right control to select the desired
water hardness.
• Press to confirm.
Type Ca + English
Mg
(ppm) [°eH]
0 to 150 0 to 11
SOFT
151 to
12 to 25
MED
350
501 to
26 to 35
HARD
500
Use of the oven
MANUAL OPERATION
• After setting the clock, the oven is ready for
use. On turning the control dial, the pre- On turning the control dial, the pre-
defined temperature is shown for each func-
tion. Turn the temperature dial to select a
new temperature and press
selection.
INFORMATION
While cooking, when the selector switch is
turned, the clock display will show the tem-
perature and it is possible to change the
oven cooking temperature by turning the
temperature dial again and pressing
confirm.
• You will notice that the
during cooking to indicate that heat is being
30
User's Guide
Water hardness
French
deg.
deg. [°fH] deg. [°dH]
0 to 15
16 to 35
36 to 50
to confirm
symbol lights up
In the event of power failure, the water hard-
ness settings will be erased. Reset it and
program again after power restore.
German
0 to 8
9 to 20
21 to 28
transmitted to the food. This symbol disap-
pears when the selected temperature has
been reached.
• Set the controls to
When you start cooking, your oven will show
the time the oven has been cooking.
If you have selected the steam cooking func-
to
tion, remember to fill the water tank before
starting to cook.
The
play throughout the cooking process.
WARNING
to turn off the oven.
INFORMATION
INFORMATION
symbol remains lit on the clock dis- symbol remains lit on the clock dis-