Kuppersbusch BD6340 Instrucciones De Uso página 35

RESIDUAL WATER IN THE OVEN
To reduce the residual water inside the oven, we
recommend inserting a tray in the bottom posi-
tion (position 1). The remaining moisture can be
easily wiped off with a cloth or cleaning wipe.
The water that condenses on the door collects
in the lower part of the front of the oven. Exces-
sive accumulation of liquid could overflow and
cause damage to the kitchen unit. Remember
to dry this area after cooking. You can access
this part with the door open.
Descale
DESCALING PROCEDURE
1. Touch or
flashes on the screen.
2. Press the to start the descaling function.
3. When the display shows "0,5", remove the
water tank.
4. Pour 0.5 liters of an adequate descaling so-
lution into the water tank and put the water
tank back.
5. Press . The Descale cycle is initiated and
takes about 30 minutes.
6. The descaling process is silent and during
this process, the display shows the per-
centage of the process and the descaling
symbol .
7. When the display shows
emits a beep, remove and empty the water
tank.
8. Fill the water tank with 0,5 liters of fresh wa-
ter and put the water tank back.
9. Close the panel The first rinsing cycle starts.
until the descaling symbol
and the oven
10. When the display shows again
oven emits a new beep, remove and empty
the water tank.
11. Fill the water tank with 0.5l of cold water
and put the water tank back.
12. Close the panel. The second rinsing cycle
starts.
13. When the rinsing cycle has finished the dis-
play shows the symbol
beep, until the water tank is removed.
14. Remove, empty and dry the water tank.
CANCEL DESCALING
It is possible to cancel the descaling process
before removing the water tank for the first time
(point 4).
1. Press and STOP is displayed.
2. Confirm with .
english
and the
and emits a
35
User's Guide