User Information; Important Notes; Safety Instructions; Electromagnetic Compatibility (Emc) - Bosch FSA 050 Instrucciones De Funcionamiento

en 22 | ��A ��� | User information
2.

User information

2.1

Important notes

Important information on copyright, liability and warran-
ty provisions, as well as on equipment users and com-
pany obligations, can be found in the separate manual
"Important notes on and safety instructions for Bosch
Test Equipment". These instructions must be carefully
studied prior to start-up, connection and operation of
the FSA 050 and must always be heeded.
2.2 �afety instructions
All the pertinent safety instructions can be found in the
separate manual "Important notes on and safety instruc-
tions for Bosch Test Equipment". These instructions
must be carefully studied prior to start-up, connection
and operation of the FSA 050 and must always be heed-
ed.
2.�

Electromagnetic compatibility (EMC)

The FSA 050 is a class B product as per EN 61 326. .
2.4

Bluetooth limitations

There are limitations in the following countries
(e. g. Bluetooth modules may only be used in enclosed
rooms) when operating Bluetooth Class 1 modules:
Egypt, France, Jordan, Pakistan, Peru, Saudi-Arabia,
Sri Lanka, Thailand and Turkey.
In the following countries, no Bluetooth modules
are to be used (Status: March 2006):
Algeria, Ethiopia, Bolivia, Burma, Georgia, Guatemala,
Cambodia, Qatar, North Korea, Senegal, South Africa,
Syria, United Arab Emirates, West Sahara.
|
1 689 989 102 2011-04-26
2.� Important information regarding
Bluetooth
Bluetooth is a wireless connection in the unlicensed
2.4 GHz-ISM-Band (ISM: Industrial, Scientific, Medical).
This frequency range is not subject to any governmen-
tal laws and may be used in most countries without a
license (Exceptions are found in chap. 2.4). This results
in many applications and devices transmitting on this
frequency band however. This can cause frequency in-
terference between these devices.
Depending on the environmental conditions, distur-
bance can occur in the Bluetooth connection, e. g. in
WLAN connections (WLAN: Wireless Local Area Net-
work), wireless telephones, radio-controlled thermome-
ters, radio-controlled garage door openers, radio-cont-
rolled light switches or radio-controlled alarm systems.
i
Bluetooth can lead to interference in the band-
width of the WLAN-network. The antennas of Blue-
tooth and WLAN devices should be positioned at least
30 centimeters apart. Bluetooth-USB adapters and
WLAN must not be placed in adjacent USB sockets in
the PC/Laptop. A USB extension cable (special acces-
sories) should be used to ensure that the Bluetooth-
USB adapter is separate from the WLAN stick.
i
Generally, people who wear a pacemaker or other
essential electronic device should exercise extreme
caution when using wireless technology, as it may
impair the function of their particular device.
Note the following to ensure that your connectivity is as
good as possible:
R
The Bluetooth wireless signal always looks for the
shortest path. Set up a PC/Laptop with Bluetooth
USB adapter so that there are as few obstacles,
such as e. g. steel doors and concrete walls, that
could disturbed the radio signal to and from the
FSA 050 as possible.
R
If the PC is in a Bosch trolley (e. g. FSA 740,
BEA 850), the Bluetooth USB adapter should be po-
sitioned outside of the trolley using a USB extension
cable. Use USB extension cable (special accessory)
1 684 465 564 (1,8 m) or 1 684 465 565 (3 m).
R
If there are problems with the Bluetooth connec-
tion, you can activate the USB connection and use it
instead of the Bluetooth connection.
R
It is not possible to operate another piece of bluetooth
hardware installed or plugged into the PC/laptop, as
the data communication between the FSA 050 and the
control unit would be disrupted as a result.
Robert Bosch GmbH