Publicidad
Idiomas disponibles
Idiomas disponibles
SEASONING YOUR GRILL
TO BE USED ON INITIAL FIRING ONLY.
auger by allowing the auger tube to be "charged" with pellets.
1
PLUG APPEARANCE MAY VARY BY REGION.
With the Main Power switch in the OFF (O) position, plug
the power cord into an appropriate grounded/earthed
electrical outlet.
3
Press MENU to display the main menu. Turn the dial to
select AUGER, then select Prime Auger.
The auger tube will take a few minutes to fill with pellets
and begin dispensing into the firepot. Once the timer for
the Prime Auger feature has completed, select Done.
In order to ensure proper operation of the grill, you must first prime the
AUGER
>Prime Auger
>Clear Auger Jam
>Back
2
Fill the hopper with TRAEGER® BRAND HARDWOOD
PELLETS.
WARNING!
HARDWOOD PELLETS, which are specifically made to
work in our grills. Never use heating fuel pellets in
the grill.
4
350
°F
Press dial
to set temp
The home screen will display "Press dial to set temp."
Turn the Selection dial clockwise to 350°F (177°C). Press
IGNITE, close grill door, and run grill for 20 minutes once
it has reached the set temperature.
350
°F
Press Dial To Set Temp
Press Dial To Set Temp
the Selection dial to the desired option and press the
center of the dial to lock in your selection.
11
Use ONLY TRAEGER® BRAND
NOTE:
Whenever you're instructed to
select or confirm a menu option, turn
TRAEGERGRILLS.COM
Publicidad
