11.
Multi-Stage Cooking
Two stages of cooking can be maximumly set. If one stages is defrosting, it will be put in
the first stage automatically. The buzzer will ring once after each stage and the next stage will
begin.
Note: Auto menu cannot be set as one of the multi-stage.
Example: if you want to defrost the food of 500g + 80% microwave power for 5 minutes.
The steps are as following:
1) Press "
2) Turn "
" to adjust the weight of the food. Stop turning when "500" displays;
3) Press"
Press "
4) Turn "
" to adjust the cooking time of 5 minutes;
5) Press "
Note: When the first stage finish, buzzer sounds once then the second stage
begins. When all of them finish, buzzer sounds five times and the unit turn
back to the waiting
12. Pre-set Function
1) Set the clock first. (Consult the instruction of clock setting.)
2) Input the cooking program. Two stages can be set at most. Defrosting
should not be set here.
3) Press "
4) Turn "
" to adjust the hour figures, the input time should be within
0--23.
5) Press "
6) Turn "
" to adjust the minute figures, the input time should
be within 0--59.
7) Press "
ring twice when the time arrives, then cooking will start automatically.
Note: 1) Clock must be set first. Otherwise,pre-set function will not work.
2) If the pre-set program has been set without the cooking program,
the whole setting will be used as an alarm clock. That means when
pre-set time arrives, buzzer will sound five times only.
GB
"twice, "dEF2" displays;
" once, turn "
" to confirm the power;
" to start cooking.
states.
". The current clock is displayed. The hour figure flash;
", the
minute figures will flash.
" to finish setting. ":" will light, buzzer will
"o choose 80% microwave power;
16