hillvert HT-HECTOR-100B Manual De Instrucciones página 37

a) Muffler
b) Exhaust pipe
c) Spark plug
d) Carburetor
e) Suction lever
f) Throttle lever
g) Starter tugger handle
h) Fuel tank
i) Fuel tank cap
j) Power take-off shaft
k) Oil filler caps (including with dipstick)
l) Oil drain plug
m) Air filter casing
n) Fuel drop tank
o) Fuel valve
p) Ignition switch
3.2.
Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed 45°C and ambient humidity should not
exceed 85%. Use the unit only in open spaces and/or well-ventilated areas. Do not
obstruct the air inlet of the unit and the exhaust outlet of the engine. Keep the unit
away from any hot surfaces. Always operate the unit on a level, stable, clean,
fireproof surface and out of the reach of children and persons with impaired mental,
sensory, and intellectual functions. The place of operation of the device should
provide easy access to the emergency shutdown lever of the device.