Descargar Imprimir esta página

hillvert HT-HECTOR-100B Manual De Instrucciones página 45

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 137
• Unfasten the clamp on top of the filter housing and tilt the top filter
cover downward
• Remove the filter from the housing.
• Inspect the condition of the filter - if it is dirty, clean it by rinsing it in
warm water with mild detergent. The filter must be completely dry
before it is reinstalled in the machine. If the filter shows signs of
damage and/or cannot be cleaned then replace it with a new one.
• IMPORTANT: the air filter must not be blown with compressed air or
rinsed in solvents!
• Install in the reverse order of removal.
m) Changing the engine oil:

Publicidad

loading

Este manual también es adecuado para:

Ht-hector-80a